RHD lift?

Has anyone put a lift on a right hand drive Cherokee? Used the search and couldn't find anything

yep what do need to know.....im down under in nz all cars rhd....

I was told rough country 4.5" lift will work but I need to find out where I can get a track bar for it and I need to know if there is gonna be any other special parts I'm gonna need since its rhd

couple of guys down here have had them made down here.....i got my lifted rugged ridge from over there and straight built up...if ya goona play around with panhard rod they be differnt but no need to ...some local fab shop should help...

How much lift you going to run? And what are your skills?

4.5" with 33s. Was gonna do 6" with 35"s but I decided to go smaller so I can do lockers and 4.27gears. I've played around with 4x4s that have leafs all the way around. Just got a new Lincoln welder so I'm gonna be learning how to weld too.

Personally, I would just lengthen the track bar if it was me. But I would hate for you to try out your skills on something like a track bar. But if you get your skills up to the task, that can be done. But use some real good rod for that kind of stuff. Don't try doing it with 6011 or 6013. I use some stuff called Super Missile weld for that kind of thing, which will not let loose and has mort tensile strength than the material you are working with

I don't really want to make or modify that myself yet. And there is not really any machine shops where I live so I'm gonna probly have to order it

Hi mate I'm from down under Australia RHD and most of us are using a Dave Woodley track bar (woodersgarage.com.au) or ironrock make a rhd track bar

I just found the one from iron rock. Thank you