Re: Power door lock issues
To be honest, I'm not an electrical genius like some of the guys we have on here, but I'm leaning towards a short in the wiring for the locks. Also, check all your fuses and make sure they are still good. One question, what do you mean by "relays"? Are you talking about under the hood relays or under the switch panel on the door?
Re: Power door lock issues
As far as the power locks go, on the 01 the lockout switch fails. You just need to clip the wires and connect them together. As far as the heat goes, just something you might need to watch. If you don't have any failures, then just see what happens
Re: Power door lock issues
Hey, thanks for your input. It seems that the relays in the passenger side switch module were stuck. this caused the warm feeling in the module. I disconnected the switch assembly and tapped on the relays. reconnected them and checked it out. locks worked fine. I will wait and see if this is going to stay this way or if they will stick again. So far so good.