thanks for the GLXJ post firehawk. Never even heard of it before. Thanks
Printable View
thanks for the GLXJ post firehawk. Never even heard of it before. Thanks
Well here is what i did... Take a permanent marker and make an outline of the vents. Make sure you have them where you want them. I think used blue masking tape and taped around the marker. I cut it on the inside of the marker line. I needed to do a little more trimming but i figured a little more trimming is better than the hole being bigger than needed.
I covered the motor also with a towel. I didnt want any debris from cutting them to be able to get into the motor. I cut mine with the hood on also. Its not too difficult. If you can trace a line then you can do this. I used a cut off wheel on a die grinder. I kept the piece i cut out so i can put bolts through them and put them on during the winter.
I also sealed mine with Blue RTV. Dont know if it makes a difference but i did.