Re: GAS /BRAKE PEDAL oops
forgot to mention that it will raise the brake pedal a tad, unless you want to cut and lengthen the arm after the bends are made.
Re: GAS /BRAKE PEDAL oops
I would Love to do that. But dont have the equiptment to do that kind of heating. I noticed that my carpet slightly bows out from the center hump next to the pedal by about 3/4" ......Would driving one small short machine screw w/washer into the carpet,drawing it close to the hump,allowing me a bit more space ...be a bad idea? It would work. 1 scheetmetal screw .......but i think it would look tacky kinda.
Re: GAS /BRAKE PEDAL oops
that would work but you could also just reglue the carpet down with no holes required. I've bent pedal arms with just a propane torch as the heat source, takes a little longer than my rosebud and oxy/acet rig but it does work and you can do it without a vice. I have used vice grips and a 12" crecent to do the bending job.
Re: GAS /BRAKE PEDAL oops
You could practice your rallycross driving skills and learn to use them at the same time. The technique also works very well while turning in sand.
Re: GAS /BRAKE PEDAL oops
well.........Removing the entire pedal got me shaking. Been doing projects on that truck for a full year now & the last few months Ive just gotten my belly full for taking on big projects because everything i take on doing wether it be heater core replace, or small rust hole, or whatever it might be seems tpo snoball into a much bigger project seems like. I just may have to check into seeing what removing the pedal entails
Re: GAS /BRAKE PEDAL oops
usually there is only one bolt to remove. If I have some time this weekend I'll take some pictures of the assembly and post a how too for you.
Re: GAS /BRAKE PEDAL oops