eking81
09-06-2011, 07:58 PM
well i got an email about not posting yet so i figured id make some time to say Hi.
ive had my 95 XJ for alittle over a year now. id been looking for a jeep for awhile and had set out to by a wrangler when i found the XJ sitting alone on the car lot and figured why not a test drive. i actually like it better then the wranglers i had been driving so tossed the cash down and drove off.
heres a couple pics of it how it was
http://i1126.photobucket.com/albums/l601/EKing81/HPIM0365.jpg
http://i1126.photobucket.com/albums/l601/EKing81/HPIM0366.jpg
i didnt get many pics of it then lol
about 6 months after buying and getting settled into my new house ( first time owner) the addiction set in
first thing i did was check which axle set and TC i had and knew right off the D30 and C8.25 was on its way out
after some time on another forum i found a XJ D44 for 200 bucks which was perfect as i wasnt looking to go full width
after a bit more time i found a waggy D44 front for 100 bucks in AZ which was also perfect so i paid the 200 shipping and had my axle set for 500 bucks which wasnt to bad
i order up some builders parts for a front and rear tube bumper and tube doors next
being a fabricator it wasnt hard slapping them together and adding my own twist to them to give me a one off bumper set
then i started to gut the poor old girl and what seemed like solid floors from under the rig turned out to be totally rotted.
so at the current moment im sitting with no front axle as i sold the D30 and no floors or interior what so ever
i bought some 18 gauge sheet metal and im making my own floor panels and a custom dash in under way
here well break for some pics
http://i1126.photobucket.com/albums/l601/EKing81/rear%20bumper%20and%20interior%20removed/HPIM0424.jpg
http://i1126.photobucket.com/albums/l601/EKing81/rear%20bumper%20and%20interior%20removed/HPIM0413.jpg
http://i1126.photobucket.com/albums/l601/EKing81/rear%20bumper%20and%20interior%20removed/HPIM0414.jpg
http://i1126.photobucket.com/albums/l601/EKing81/rear%20bumper%20and%20interior%20removed/HPIM0416.jpg
http://i1126.photobucket.com/albums/l601/EKing81/rear%20bumper%20and%20interior%20removed/HPIM0425.jpg
as you can see the floors are pretty bad i lost some of the pics its even worse then those show
you can also see my doors are off ive done the removeable door mod
and the rockers have been cut out and will be getting boatsided with 2x6x3/16 tube
now that i have got this far and put some extensive work into this project i think ill end up selling my D44's and going full width with a 9" rear and a D44 front
4 linked front and rear with 4 wheel disk and a dual e brake set up
now a quick peek at the bumpers
the front isnt finished yet but will be a winch bumper when done
http://i1126.photobucket.com/albums/l601/EKing81/front%20bumper/HPIM0406.jpg
http://i1126.photobucket.com/albums/l601/EKing81/front%20bumper/HPIM0408.jpg
http://i1126.photobucket.com/albums/l601/EKing81/front%20bumper/HPIM0409.jpg
http://i1126.photobucket.com/albums/l601/EKing81/front%20bumper/HPIM0405.jpg
and the rear tube bumper with tire carrier
YES I SAID REAR TUBE BUMPER WITH CARRIER just for those who think its impossible...... itll bend..... :rolleyes:
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/HPIM0483.jpg
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/HPIM0486.jpg
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/HPIM0484.jpg
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/HPIM0487.jpg
and some pics of one i sold (guess its not one off any more lol) finished in bed liner and mounted
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/005.jpg
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/006.jpg
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/015.jpg
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/013.jpg
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/012.jpg
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/5.jpg
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/023.jpg
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/020.jpg
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/018.jpg
these bumpers went from buy a kit (with custom bends for the wrap around) to building a air over hydraulic bender using prints from GotTrikes so everything can be done in house and shipping them all over
well thats my hello hope you all enjoy youll have to wait till i get time for a fab thread to get more lol
Eric
ive had my 95 XJ for alittle over a year now. id been looking for a jeep for awhile and had set out to by a wrangler when i found the XJ sitting alone on the car lot and figured why not a test drive. i actually like it better then the wranglers i had been driving so tossed the cash down and drove off.
heres a couple pics of it how it was
http://i1126.photobucket.com/albums/l601/EKing81/HPIM0365.jpg
http://i1126.photobucket.com/albums/l601/EKing81/HPIM0366.jpg
i didnt get many pics of it then lol
about 6 months after buying and getting settled into my new house ( first time owner) the addiction set in
first thing i did was check which axle set and TC i had and knew right off the D30 and C8.25 was on its way out
after some time on another forum i found a XJ D44 for 200 bucks which was perfect as i wasnt looking to go full width
after a bit more time i found a waggy D44 front for 100 bucks in AZ which was also perfect so i paid the 200 shipping and had my axle set for 500 bucks which wasnt to bad
i order up some builders parts for a front and rear tube bumper and tube doors next
being a fabricator it wasnt hard slapping them together and adding my own twist to them to give me a one off bumper set
then i started to gut the poor old girl and what seemed like solid floors from under the rig turned out to be totally rotted.
so at the current moment im sitting with no front axle as i sold the D30 and no floors or interior what so ever
i bought some 18 gauge sheet metal and im making my own floor panels and a custom dash in under way
here well break for some pics
http://i1126.photobucket.com/albums/l601/EKing81/rear%20bumper%20and%20interior%20removed/HPIM0424.jpg
http://i1126.photobucket.com/albums/l601/EKing81/rear%20bumper%20and%20interior%20removed/HPIM0413.jpg
http://i1126.photobucket.com/albums/l601/EKing81/rear%20bumper%20and%20interior%20removed/HPIM0414.jpg
http://i1126.photobucket.com/albums/l601/EKing81/rear%20bumper%20and%20interior%20removed/HPIM0416.jpg
http://i1126.photobucket.com/albums/l601/EKing81/rear%20bumper%20and%20interior%20removed/HPIM0425.jpg
as you can see the floors are pretty bad i lost some of the pics its even worse then those show
you can also see my doors are off ive done the removeable door mod
and the rockers have been cut out and will be getting boatsided with 2x6x3/16 tube
now that i have got this far and put some extensive work into this project i think ill end up selling my D44's and going full width with a 9" rear and a D44 front
4 linked front and rear with 4 wheel disk and a dual e brake set up
now a quick peek at the bumpers
the front isnt finished yet but will be a winch bumper when done
http://i1126.photobucket.com/albums/l601/EKing81/front%20bumper/HPIM0406.jpg
http://i1126.photobucket.com/albums/l601/EKing81/front%20bumper/HPIM0408.jpg
http://i1126.photobucket.com/albums/l601/EKing81/front%20bumper/HPIM0409.jpg
http://i1126.photobucket.com/albums/l601/EKing81/front%20bumper/HPIM0405.jpg
and the rear tube bumper with tire carrier
YES I SAID REAR TUBE BUMPER WITH CARRIER just for those who think its impossible...... itll bend..... :rolleyes:
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/HPIM0483.jpg
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/HPIM0486.jpg
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/HPIM0484.jpg
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/HPIM0487.jpg
and some pics of one i sold (guess its not one off any more lol) finished in bed liner and mounted
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/005.jpg
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/006.jpg
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/015.jpg
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/013.jpg
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/012.jpg
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/5.jpg
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/023.jpg
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/020.jpg
http://i1126.photobucket.com/albums/l601/EKing81/Plums%20bumper/018.jpg
these bumpers went from buy a kit (with custom bends for the wrap around) to building a air over hydraulic bender using prints from GotTrikes so everything can be done in house and shipping them all over
well thats my hello hope you all enjoy youll have to wait till i get time for a fab thread to get more lol
Eric