View Full Version : plasti-gauge specs
msmoorenburg
08-23-2011, 07:48 AM
Who has a Chilton laying around that can give me the plasti-gauge specs for a 4.0?
I need the Rod & Crank info
OrangeXJ
08-23-2011, 02:05 PM
Conecting rod
Desired 0.0015 to 0.002
Allowable 0.001 to 0.003
Rod side clearance0.010 to 0.019
Crankshaft
Desired 0.002
Allowable 0.001 to 0.0025
Thrust end play 0.0015 to 0.0065
This info is from my Haynes manual
Mudderoy
08-23-2011, 02:11 PM
What do you do if it is larger? Start over? Thicker bearing? Shims? :crazy:
msmoorenburg
08-23-2011, 02:15 PM
have the crank turned :( I just want to verify the machine work and bearings
OrangeXJ
08-23-2011, 02:16 PM
More than likely you will find it smaller not bigger
Mudderoy
08-23-2011, 02:19 PM
have the crank turned :( I just want to verify the machine work and bearings
More than likely you will find it smaller not bigger
Oh! Okay then you are just verifying that the machine shop did their job correctly!
Thanks
OrangeXJ
08-23-2011, 02:23 PM
Or to see if your existing crank is use able
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.