View Full Version : Sliders maybe?
4x4Dalton
05-18-2011, 05:27 PM
Ok yall I know there is goin to be some Nay Sayers to this but still want yalls ideas. I was wonderin if you had side steps and welded a plate from bottom of it to the frame where it bolts to would that be ok for sliders?
xj4life2
05-18-2011, 05:32 PM
Not sure I follow ya Bear, ya talking about nerf bars?
4x4Dalton
05-18-2011, 05:32 PM
Yep.
xj4life2
05-18-2011, 05:38 PM
Nerf bars actually connect to spring mount in the rear and ctl arm mount in the front if I remember correctly. I welded mine in and still run them , get bagged on a bit for being old school but before sliders were around its all we had so in my opinion they cool just weld em on. For the record I can stand on mine an they hold fine lol lol
4x4Dalton
05-18-2011, 05:40 PM
Nerf bars actually connect to spring mount in the rear and ctl arm mount in the front if I remember correctly. I welded mine in and still run them , get bagged on a bit for being old school but before sliders were around its all we had so in my opinion they cool just weld em on. For the record I can stand on mine an they hold fine lol lol
Cool Mark thats what I was hopin to hear :D
xj4life2
05-18-2011, 05:45 PM
The best part is there cheap $200.00 you could also look at the trail gear sliders they will work but you have to build the bar to the sub frame
OrangeXJ
05-19-2011, 05:11 AM
My son has them on his xj and they work fine for sliders.
rugidone
05-19-2011, 06:51 AM
Isn't the metal really thin and dents easily though?
LizardRunner
05-19-2011, 05:23 PM
As long as they are made of fairly substatial metal (not really thin stuff) I don't know why they wouldn't work if you weld em in like Mark says.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.