Will Baja MTZ 31x10.50 fit on The Nasty?

[Switch_knuckles]

A guy has a set of Mickey Thompson Baja MTZ 31x10.50 for sale. He said he had them on his Grand Cherokee with no spacers. Will they fit on The Nasty? Right now I have 3" of lift in the back and stock on the front?

http://i913.photobucket.com/albums/ac335/Switch_Knuckles/xjtalk/MickeyThompsonBajaMTZ31x1050onBlack15rims.jpg

[bigjim350]

They will probably rub on the front unless you lift some or do some trimming.

[Switch_knuckles]

I have removed the flares but not cut anything yet.

[cantab27]

trim,some ,,may rub on arms at full lock

[XJ Rat]

100% stock they will rub. 30x9.5 is the biggest you can usually go without rubbing.

Put on a 3.5" lift and 31x10.5 will fit. I got a little bit of rubbing at full stuff on the back side of the rear fenders. For the front, some people buy new rims with more backspacing or put washers behind the stops on the front axle to eliminate the rubbing at full lock. When I had 31" tires they did not touch the control arms. Factory tolerances, some will rub and some won't. My rims were factory aluminum 2001 Wrangler wheels.

If they are a good price get em. You can add a spacer in the front and put extended shackles on the rear for a 1/2" of lift.

[Switch_knuckles]

Thanks guys. Called the guy, went to get them then as I was driving up to the house I saw them loading the tires and rims into some guys truck.

[xjpirate]

Thanks guys. Called the guy, went to get them then as I was driving up to the house I saw them loading the tires and rims into some guys truck.

what i dick, verbal agreement means nothing with some people:thumbdown:

[Switch_knuckles]

Yeah, I was not happy. But hey $hit Happens.