PDA

View Full Version : work to do to the jeep



rguignard
03-09-2011, 03:42 PM
well we all got jeeps so what needs to be done to it :sad0147: and what would you like to do to it ? :D
ill start i need to do
1. tc i have a 242 in it now that wont stay in 4 low its getting a 231 /done
2. bent uca /fixed
3. install the 8.25 rear end /done
4. brace up the uca mounts on the axle
5. make a trans crossmember bent mine last weekend
6. install new bushings in lca
7. new rear u joint again

msmoorenburg
03-09-2011, 03:44 PM
I need the 4x4 swap to be finished up

and a better feeling brake pedal :driving:

cherokeewrecker
03-09-2011, 06:36 PM
whats getting done soon...

1. Alignment (getting done tuesday)
2. tune up if i can get distributer cap off...without breaking screws:headshake:
3. rear brakes
4. fix little rust on drivers side rocker panel before it rots out
5. paint floorboards underneath

what i'd like to do...

1. get front bumper and rear bumper over summer
2. get my amp hooked up
3. roof rack
plus a bunch of little things on this list...

bigjim350
03-09-2011, 09:30 PM
Well....my junk needs a shit load of work done. But lets start with the damage that was done last weekend, cause...well hell I have pics of it :D By the way I hit a tree.
http://i20.photobucket.com/albums/b249/bigjim350/100_0523.jpg
http://i20.photobucket.com/albums/b249/bigjim350/100_0524.jpg
http://i20.photobucket.com/albums/b249/bigjim350/100_0525.jpg

msmoorenburg
03-10-2011, 06:33 AM
Well....my junk needs a shit load of work done. But lets start with the damage that was done last weekend, cause...well hell I have pics of it :D By the way I hit a tree.
http://i20.photobucket.com/albums/b249/bigjim350/100_0523.jpg
http://i20.photobucket.com/albums/b249/bigjim350/100_0524.jpg
http://i20.photobucket.com/albums/b249/bigjim350/100_0525.jpg

and as Jim say's (its all Matt's fault)

Outlaw
03-10-2011, 06:55 AM
Oh man where to start...

1. Two side mirrors
2. Rear Lift gate struts
3. Tune-up
4. Track Bar
5. Drop Pitman arm
6. Radio
7. CB
8. Heater Control Unit
9. New brakes all around, including master cylinder and booster.
10. Paint (waiting for a nice weekend)
11. New UCA and LCA's
and so much more to list.... where's my wallet? Oh yeah it's become a master of hide and seek lately :D

OrangeXJ
03-10-2011, 08:32 AM
Start installing the long arms

LizardRunner
03-10-2011, 10:02 AM
getting done soon as the part gets here:
heavy duty steering box and new ps hp hose.
New Master cylinder/booster install

things to fab and install:
1. front, low mount, winch bumper w/recovery mounts(3/4")
2. rear bumper w/same recovery mounts
3. full frame section re-enforcements
3.5. Sliders/air tanks
4. Trany/TC belly protector
5. Currie steering upgrade
6. Clayton 4.5" lift kit
7. new rims and tires 31x10.5x15 or 16 rims if I can't find size 15

cantab27
03-10-2011, 11:11 AM
nothing ,,,,shes running pretty as.....but for how long is the question

4.3LXJ
03-10-2011, 11:48 AM
Me too Wayne, runs good. Could finish my spare tire carrier, but it is a swamp around the shop right now. Gotta fill that big gas tank though. OUCH!

steph74
03-10-2011, 01:58 PM
you guys are not real jeepers... according to the real jeeper list you should take appart something even if it is working fine.....

List is way too long but the essentials are going to be at some point:
-tinkering with the bastard pack a little more
-roof rack (home made)
-bigger tires,
-rock rails
-bumpers
-finishing understanding the whole thing and definitely learning more

LizardRunner
03-10-2011, 02:05 PM
dang forgot some things...
snorkel for creek diving
roof rack spare tire mount
pair of high speed hydrolic rams for tail gaters
swing out steps for passenger side entry
dual battery setup
onboard air

OrangeXJ
03-10-2011, 02:32 PM
Well....my junk needs a shit load of work done. But lets start with the damage that was done last weekend, cause...well hell I have pics of it :D By the way I hit a tree.
http://i20.photobucket.com/albums/b249/bigjim350/100_0523.jpg
http://i20.photobucket.com/albums/b249/bigjim350/100_0524.jpg
http://i20.photobucket.com/albums/b249/bigjim350/100_0525.jpg

If that's the same tree that got me I say next time we are there we bring a chain saw and take it out with extreme predigest :eek:

rguignard
03-10-2011, 03:15 PM
If that's the same tree that got me I say next time we are there we bring a chain saw and take it out with extreme predigest :eek:

the one coming out of the creek :shocker:

bigjim350
03-10-2011, 04:16 PM
Well to be honest that tree is easy to get around.....if your sober. And yes it was Matt's fault.

cantab27
03-10-2011, 05:50 PM
i was told ya backed ya Honda into it and the jeep is ya wife's dd

XJ4IV
03-15-2011, 01:54 AM
Start installing the long arms

You help me toss in my motor on my durango and Ill help you do the long arms... I have done em LOL

XJ4IV
03-15-2011, 02:00 AM
Lets seeeee
Buy fox air shocks
Mount tabs for air shocks
New gears front n rear
custom driveshafts
locking front n rear
lug adapters for front axle
tires
231 with SYE
until then install new 242 chain
swap winches
install new smaller tool box
install CO2 system again
doorless rear doors
make new rear doors for offroading
shackle relocation brackets
...
NEXT summer
Stroker 4.6
new cam
new crank
new pistons
new baer brake system