New injectors for the beast!

[Mudderoy]

Well rguinard and WORPOffroad peer pressured (in chatbox) me into buying some e-bay injectors the other day.

http://xjtalk.com/images/special/jeepnewinjectors.jpg

So I sent the guy a message asking him if they were 4 hole nozzels. Hope hope hope... Here is his response.

http://xjtalk.com/images/special/jeepnewinjectors1.jpg

Now I won't pretend to be any kind of injector expert, but 6?!?!?!

[W.O.R.P.Offroad]

6 will work just as good as 4 if not better. but those where the wrong connectors. you will need to get the connectors from like a 01 xj if they will work or a late model ford.

[Mudderoy]

6 will work just as good as 4 if not better. but those where the wrong connectors. you will need to get the connectors from like a 01 xj if they will work or a late model ford.

lol swell.

[4.3LXJ]

The more holes the better. That is the idea, better pattern and volatilization.

[novastique]

Im curious to how well they work. And hey, ya got a couple extra!

[Mudderoy]

Im curious to how well they work. And hey, ya got a couple extra!

I'm curious as well. They came in today, and that's only because they required a signature and no one was here yesterday when the first delivery attempt was made. I think transit time was 1 day!?!?!?!

Anyway I'm disappointed to find out that I have to find some plugs before I can change them. Maybe this is a common thing, but I thought that I would be able to just plug these into the existing wiring.

I guess it will be a few more days before I'll see if this helps the running of the engine.

[Mudderoy]

If you've read this thread you know I have a problem. I have 8 pristine Ford 24 lbs injectors begging, yes begging, for me to install them but I can not.

The connectors are different from the connectors I have on the XJ.

Other than going to a junk yard to cut and take home the necessary connectors does anyone know of another source? A cheap source naturally.

I think I'm going to start with ebay after I find out the exact injectors I have.

How common is it to have to replace the connectors on the XJ when you install new, non Chrysler OEM injectors? Or did I just buy the wrong ones?

[Mudderoy]

So all I had to do what scroll up in the post to see that they are Ford 24 lbs injectors, part number 9L3EE7A.

http://lh6.ggpht.com/_b0ViaGso2Ko/S8EOPjV2KXI/AAAAAAAAAAU/xqAydeyahNE/2010-04-10%2018.43.02.jpg

http://lh3.ggpht.com/_b0ViaGso2Ko/S8EZgn7vVQI/AAAAAAAAABI/Hf95PqNtu0o/2010-04-10%2019.35.31.jpg

Now to start searching for 9L3EE7A electrical connectors.

[Mudderoy]

Anyone know what the connector type for the 1998 Jeep 4.0L is?

[W.O.R.P.Offroad]

the 98 is a ev i think and those are ev6(uscar) if i have my numbers and letters right. basically any OBD2b plugs will work go to the local junk yard and take a injector with you test fit til you find the right one and snag 6.

if you dont want to go to a jy here is a web site you can oder some from. there are a set of 6 for $39.00

http://www.fiveomotorsport.com/electrical-connectors/?itemid=29

[W.O.R.P.Offroad]

here is a set that plug into your factory plug and then connect to the new injectors cost a lil more though. $55.50

http://www.fiveomotorsport.com/electrical-connectors/?itemid=36


these are a lil cheaper at $52.50 and dont have the short section of wire as the ones above
http://www.fiveomotorsport.com/electrical-connectors/?itemid=22

[Mudderoy]

here is a set that plug into your factory plug and then connect to the new injectors cost a lil more though. $55.50

http://www.fiveomotorsport.com/electrical-connectors/?itemid=36

How about these?

:link: (http://www.summitracing.com/parts/CEI-109077/?rtype=10)

these are a lil cheaper at $52.50 and dont have the short section of wire as the ones above
http://www.fiveomotorsport.com/electrical-connectors/?itemid=22

How about these? :link: (http://www.summitracing.com/parts/CEI-109077/?rtype=10)

http://static.summitracing.com/global/images/prod/large/cei-109077_w.jpg

$46.50 from Summit, doesn't include shipping.

[Mudderoy]

Ok here is a picture of the connector on my 1998 Jeep Cherokee 4.0L

http://lh6.ggpht.com/_b0ViaGso2Ko/S8FC8ysF0uI/AAAAAAAAACE/Bk7OLBMBQKY/2010-04-10%2021.58.30.jpg

Here is a picture of the injector connector also on the Ford 9L3E-E7A (Ford Mustang 2005-2009 Injectors)

http://lh3.ggpht.com/_b0ViaGso2Ko/S8FElZAc-ZI/AAAAAAAAACM/-0wbgPxfnp4/2010-04-10%2022.38.09.jpg

So I think these will work...

http://static.summitracing.com/global/images/prod/large/cei-109077_w.jpg

[Mudderoy]

http://ep.yimg.com/ca/I/mustangtuning_2099_967254047

$39.99 for 8

[4.3LXJ]

That looks like the right stuff Muddy

[Mudderoy]

Ok so I got those adapters for $39.99 shipped!

http://xjtalk.com/images/special/jeepnewinjectors3.jpg

[Mudderoy]

YouTube- 1998 XJ 150k+ miles Pre Injector swap

[W.O.R.P.Offroad]

damn i dont even think my jeep will go that fast anymore

[TheWeiss]

If I have a 96 XJ what Injectors would make the easiest swap for me? From what I gathered, injectors were $250 + for a set. If I come across pricing as good as Mudderoy's was then it would be good to know what the best parts are to look for.

[W.O.R.P.Offroad]

i got my set for 16 shipped it just depends on the deal you find.

here rear this i wrote it to help and tell people what they need to do to get it right

http://www.xjtalk.com/showthread.php?p=37333#post37333

[Mudderoy]

EV6 to EV1 adapters should be delivered today...

http://xjtalk.com/images/special/jeepnewinjectors4.jpg

[Mudderoy]

The EV6 to EV1 injector connector adapters have arrived!

http://xjtalk.com/images/special/jeepnewinjectors6.jpg http://xjtalk.com/images/special/jeepnewinjectors5.jpg

:D

[96xj]

your tooo funny

[alwaysxj]

so you have older kids right? is this for when they get dropped of from a date you can she how they say good night.

[Mudderoy]

so you have older kids right? is this for when they get dropped of from a date you can she how they say good night.

My boys are adults. My girls are not. The girls don't date yet, so there's no need to monitor the goodnight kiss. Besides I wouldn't have a camera there for that anyway. The camera at the door gives us, mainly my wife and children the ability to see who is at the door prior to opening it, and actually be far away from the front door.

I have plans to install an intercom that will allow me to speak with the person at the front door from anywhere in the world.

There is a few other things I want to do like monitor temperature, alarm status etc... via the Internet.

Short term I'm going to relocate my camera in the back yard. Not sure if it will stay there, or I may point it more skyward to capture weather conditions like thunderstorms, airplanes etc...

[alwaysxj]

i see. you sure do like your tech stuff don't you.

we have this local mutiple million dollar persone that i have been told his camera in his house is set up to the stop lights and free way cameras from logan to salt lake for when he visits his company. not sure if it is tru or not but man that would be cool to have.

[Mudderoy]

i see. you sure do like your tech stuff don't you.

we have this local mutiple million dollar persone that i have been told his camera in his house is set up to the stop lights and free way cameras from logan to salt lake for when he visits his company. not sure if it is tru or not but man that would be cool to have.

He who understands technology is less likely to be controlled by it.

[W.O.R.P.Offroad]

not get the damn things in and give us a update

[Mudderoy]

http://xjtalk.com/images/special/jeepnewinjectors7.jpg

YouTube- Jeep Ford EV6 to EV1 adapters for EV6 style Injector

[XJ4IV]

I haave a 92 is my harness the same as yours? also did you have to change anything as far as fuel pressure? WORP was saying you should but I didnt read anything about that on your thread. Did I miss it?

[Mudderoy]

I haave a 92 is my harness the same as yours? also did you have to change anything as far as fuel pressure? WORP was saying you should but I didnt read anything about that on your thread. Did I miss it?

Mine is a 1998 and I still need to do more research, but from what I understand right now since mine is a OBD II the computer will make the necessary fuel pressure adjustments. All I will need to do is replace the injectors.

[XJ4IV]

so what if I did THESE??? http://precisionautoinjectors.com/product.sc?productId=5&categoryId=2

[Mudderoy]

so what if I did THESE??? http://precisionautoinjectors.com/product.sc?productId=5&categoryId=2

My understanding is you need 19 lbs injectors, like the ones WORP was going to sell me. He saw I had a 1998 and told me his wouldn't work, and then he pointed out on ebay the one's I have now. They are 24 lbs injectors.

[XJ4IV]

well crap how much was he selling them for? and is mine OBDII? it's a 92 and I cant recall when the switch was.

[4.3LXJ]

Switch was in 96. Yours is the Renix

[Mudderoy]

Old Injectors removed and new(ish) injectors installed.

Film at 11!

[W.O.R.P.Offroad]

act xj yours isnt renix they stopped that in 90 yours is Chrysler injection

[XJ4IV]

well GREAT lol so NOW what do I do?

[XJ4IV]

BTW my misfire was just bad tank of fuel... 43 bucks wasted... I only got 117 miles out of it too... maybe thats why they were giving away free carwashs LOL they asked If I wanted one and I told them "seriously look at it" my jeep would cause more damage to the carwash than the carwash could do to the jeep!!!

[Mudderoy]

Thanks to WORP and rguinard (Rene) for pointing me to the injectors on ebay and offer up other advice!

:thanx: