Mudderoy
06-08-2019, 07:30 PM
Changing out all the bars for round LED lights
14740
Been designing, collecting and today started doing some measuring and drilling.
14737
14738
14739
Round LED Light bar Specs:
8 CREE 80 watt (5 watt LED x 16) 5.5" Round 8000 lm LED lights. (https://amzn.to/2Xiy8N7) $380 from Amazon
Estimated light output 64,000 lm. Estimated current draw 46 amps at 13.8 volts. Estimated weight 30 pounds.
52" Square steel tube (Home Depot 1-1/4 in. x 1/16 in. x 72 in. Plain Square Tube) https://www.homedepot.com/p/Everbilt-1-1-4-in-x-1-16-in-x-72-in-Plain-Square-Tube-800867/204331422
Tube that holds the 8 lights
Flat Steel Bar (Home Depot 1-1/4 in. x 72 in. Plain Steel Flat Bar with 1/8 in. Thick) https://www.homedepot.com/p/Everbilt-1-1-4-in-x-72-in-Plain-Steel-Flat-Bar-with-1-8-in-Thick-801047/204225738
Used to make 8 "U" shaped brackets to mount the lights to the tube.
Steel Rod 1 1/8" x 6" (Had to order mine online since Home Depot didn't carry anything this big.)
2 3" pieces that slide into the tube ends to provide mounting points for the light bar. Drilled and tapped for hardware.
1" Plastic caps (BPF- 1" - 1 Inch Flush Mount Black Plastic Body and Sheet Metal Hole Plug (Amazon https://amzn.to/2N7ct75)
Used to cover 1" holes on the back of the square tube that provides access to the nut mounting light bracket to tube)
14740
Been designing, collecting and today started doing some measuring and drilling.
14737
14738
14739
Round LED Light bar Specs:
8 CREE 80 watt (5 watt LED x 16) 5.5" Round 8000 lm LED lights. (https://amzn.to/2Xiy8N7) $380 from Amazon
Estimated light output 64,000 lm. Estimated current draw 46 amps at 13.8 volts. Estimated weight 30 pounds.
52" Square steel tube (Home Depot 1-1/4 in. x 1/16 in. x 72 in. Plain Square Tube) https://www.homedepot.com/p/Everbilt-1-1-4-in-x-1-16-in-x-72-in-Plain-Square-Tube-800867/204331422
Tube that holds the 8 lights
Flat Steel Bar (Home Depot 1-1/4 in. x 72 in. Plain Steel Flat Bar with 1/8 in. Thick) https://www.homedepot.com/p/Everbilt-1-1-4-in-x-72-in-Plain-Steel-Flat-Bar-with-1-8-in-Thick-801047/204225738
Used to make 8 "U" shaped brackets to mount the lights to the tube.
Steel Rod 1 1/8" x 6" (Had to order mine online since Home Depot didn't carry anything this big.)
2 3" pieces that slide into the tube ends to provide mounting points for the light bar. Drilled and tapped for hardware.
1" Plastic caps (BPF- 1" - 1 Inch Flush Mount Black Plastic Body and Sheet Metal Hole Plug (Amazon https://amzn.to/2N7ct75)
Used to cover 1" holes on the back of the square tube that provides access to the nut mounting light bracket to tube)