PDA

View Full Version : Problems



Smitheman1
05-04-2016, 07:38 PM
I have a 92 jeep 4.0 5 speed. Everytime I drive in 1st and 2nd and 3rd gear the rpms drop and almost stalls out. What could be the problem ??

Sent from my SM-N910V using Tapatalk

4.3LXJ
05-04-2016, 09:01 PM
Is this at idle or when driving?

Smitheman1
05-04-2016, 09:17 PM
Only when I am driving. It idles perfectly fine

Sent from my SM-N910V using Tapatalk

Mudderoy
05-04-2016, 09:42 PM
What RPM do you get to before it drops?

Smitheman1
05-04-2016, 09:46 PM
Between 1000 and 1500 ad it will drop then shot up past 2000

Sent from my SM-N910V using Tapatalk

4.3LXJ
05-04-2016, 09:49 PM
So I am still a little confused. You are driving and you put the clutch in to what, shift? Then the rpms increase while you are shifting?

Smitheman1
05-04-2016, 09:50 PM
After I shit and the clutch out. Then the rpms drops and shot up past 2000

Sent from my SM-N910V using Tapatalk

4.3LXJ
05-04-2016, 11:13 PM
So it is still in gear I take it. If so it sounds like your clutch is worn out

Mudderoy
05-04-2016, 11:13 PM
What do you think Steve, TPS?

4.3LXJ
05-04-2016, 11:14 PM
If I am reading his posts correctly, it is still in gear when it does this. If so, his clutch is worn out. If I am reading it correctly

slvmart
05-06-2016, 03:57 AM
Sounds to me that the problem is while driving and the trans is shifted (into 1st, 2nd or 3rd gears). Once, in those 3 gears and hitting 1 - 1.5k rpm is reached, the engine almost stalls. Apparently, this doesn't happen, or is not perceptible, in 4th and 5th gear.

Is this a accurate statement of the problem ?

When the rpm recovers, does it jump up to where it should be, or does it climb up slowly ?

Your profile shows your mileage as 1, how many miles on the XJ ?

Has there been any work done on the drive train in the recent past ?


And on the just wondering side of things, have you checked the oil level in the trans ?