itsleewelch
04-10-2016, 11:34 AM
blower motor in my jeep does not work:
motor tested ok, fuses ok, relay behind glovebox ok, resistor pack ok, i have no power to the hvac controls, whatsoever.
PO stated heater cores was replaced before i got it, there are 3 connectors in passenger side floor board that are unhooked with no mates. any idea what they are and what they connect to?
this is on the fuse block, 3 prong connector.
http://i1339.photobucket.com/albums/o709/itsleewelch/IMG_20160409_192400715_zps1mtbyn0m.jpg
this one is connected to the main harness that runs along the firewall
http://i1339.photobucket.com/albums/o709/itsleewelch/IMG_20160409_192324852_zps6mmmvzps.jpg
this one is attached to the harness that connects to the fuse block
http://i1339.photobucket.com/albums/o709/itsleewelch/IMG_20160409_192250836_zpsignafh0q.jpg
any help would be appreciated, ive checked various wiring diagrams that really havent gotten me anywhere and i refuse to take it to a shop.
thanks in advance to anyone able to shed light in on this
motor tested ok, fuses ok, relay behind glovebox ok, resistor pack ok, i have no power to the hvac controls, whatsoever.
PO stated heater cores was replaced before i got it, there are 3 connectors in passenger side floor board that are unhooked with no mates. any idea what they are and what they connect to?
this is on the fuse block, 3 prong connector.
http://i1339.photobucket.com/albums/o709/itsleewelch/IMG_20160409_192400715_zps1mtbyn0m.jpg
this one is connected to the main harness that runs along the firewall
http://i1339.photobucket.com/albums/o709/itsleewelch/IMG_20160409_192324852_zps6mmmvzps.jpg
this one is attached to the harness that connects to the fuse block
http://i1339.photobucket.com/albums/o709/itsleewelch/IMG_20160409_192250836_zpsignafh0q.jpg
any help would be appreciated, ive checked various wiring diagrams that really havent gotten me anywhere and i refuse to take it to a shop.
thanks in advance to anyone able to shed light in on this