Power Antenna connected to ???

[Crist Clapper]

The Power-Antenna has a 3-wire connector. The Radio has 1-wire lead. The antenna connects to a relay (below). So... What goes between the relay and the radio?

http://i1174.photobucket.com/albums/r620/TheClassicCove/Untitled2_zps4gywpvjr.png

http://i1174.photobucket.com/albums/r620/TheClassicCove/quTHOLncDrdP136173009721P4391_zpshz5uljd3.jpg

http://i1174.photobucket.com/albums/r620/TheClassicCove/s-l1600_zpsq4wkouuj.jpg

[nickyg]

The power antenna wire (usually blue) from the radio to trigger the relay?

[Crist Clapper]

The power antenna wire (usually blue) from the radio to trigger the relay?

Agree. If you look at the enclosed relay... There appears to be 2 slots for 2 individual 3-pin connectors. One for the 3-pin back to the antenna? Here is where I get stumped. Seems the relay wants another 3-pin... But I only have one wire from the radio.

I've got to be missing something obvious!

[oderdene]

here is sample power antenna diagram,

http://www.gnttype.org/techarea/images/wiring_images/pwr_antenna_circuit.jpg

when radio on AM/FM, it will trigger antenna relay, relay is energized and antenna going up. when it reaches to max, internal up switch will disconnect motor power

when radio turn off, relay will de-energize and polarity to motor changed, motor reverses and antenna will go down till down switch cuts power.

[oderdene]

here is part of wiring diagram of 88 Xj,

RED-TAN is from Battery -Always hot,
GRAY - from radio
BLACK - chassis ground

other three will go to power antenna

[Crist Clapper]

Thank you! X3

[Crist Clapper]

Just another "Thank You" for the help! Closing this out with the below... I just have to connect A to B... Done!

http://i1174.photobucket.com/albums/r620/TheClassicCove/RR_zpsi9dagbfz.png