Borgeson HD Steering shaft #000893

[Phase09]

Has anyone had trouble with installing a Borgeson Steering shaft #000893 on the 2000 XJ mine seems to be 9 inches to short I called Borgeson they claim I got the right one and it should extend to 26 inches which it does however still to short my steering box is stock mounted in the stock location I purchased off 4wd.com they can not help either they did say they had a problem with the shafts miss marked but Burgeon claims that never happened

[4.3LXJ]

Doesn't that shaft telescope? IIRC it does. It just might be collapsed

[Phase09]

It does it's all the way out and still to short

[4.3LXJ]

Why don't you collapse it all the way and call them and ask them what the collapsed length should be. If it is shorter than they say, then perhaps there was a goof someplace.

[Phase09]

I did that the claim it's the right size unless the sun was so hot it extended my frame 10" I'm at a loss still 10 inches to short I got the oem steering box mounted in the factory location nothing has changed Borgeson shaft is 34" end to end I need 42"


Sent from my iPad using Tapatalk

[4.3LXJ]

I don't know what else to suggest. Are you sure you have extended it all the way?