View Full Version : I need a part/bolts can anyone help?
dagod16
11-24-2014, 09:06 PM
I need sway bar bushing bolts for the two brackets.
I need 4 new or good condition bolts.
The old bolts are missing a few threads. I don't mind going to ACE and buying some new bolts but I cant take the bolt off because I put them back in place for temp but need new bolts.
Does anyone know what size these bolts are?
Jeep no longer sells the bolts.
nickyg
11-25-2014, 12:53 AM
I ditched the factory bolts and lil threaded clip. I used grade 8 7/16 bolt and nut. (I think it was 7/16)
slvmart
11-25-2014, 05:11 AM
I don't know the sizes, off the top of my head. But do make sure to use Grade 8 bolts.
http://www.mcmaster.com/#=uqvsml
Also, McMaster - Carr is a good source for quality Hardware (IMO).
dagod16
11-26-2014, 04:21 PM
I took a bolt to ACE and they matched it up perfect and I got grade 10. They guy said it was better than grade 8.. They were $1.70 each. They worked just fine.
Thanks for your help.
slvmart
11-27-2014, 06:36 AM
Grade 10 sounds like a Metric bolt. Where the rating is usually a 10.9.
SAE Grade Bolt Grades and Metric Class designations :
http://www.americanfastener.com/astm-sae-and-iso-grade-markings-for-steel-fasteners/
Not sure what ACE really supplied you with.
nickyg
11-28-2014, 01:47 PM
Grade 10 sounds like a Metric bolt. Where the rating is usually a 10.9.
SAE Grade Bolt Grades and Metric Class designations :
.
I have a problem buying hardware that made it to a higher grade then me..
dagod16
11-29-2014, 07:02 AM
Haha
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.