How do i get this off

[HeepJr]

i pulled the carpet cause i have to get rid of some rust and when i pulled the carpet the fuzz or insulation or what ever is under it was glued to the floor and i cant get it all up any suggestions

[4.3LXJ]

If you have a 4" angle grinder with a sanding disk or scotch brute pad it will come off in a couple of minutes and you will have some clean metal to work with

[NW99XJ]

....if you cant get it up, I would recommend a little blue pill.... I hear they work wonders. :D

[HeepJr]

Hahahaha nice but thanks steve :)

[NW99XJ]

In all seriousness, Yea I would use an angle grinder, and I would stay away from the typical grinding disks, or flap wheels.
You'll want to go with something that is designed more for stripping paint...
THESE work real well on the undercoating when prepping to weld on frame stiffeners.
http://t2.gstatic.com/images?q=tbn:ANd9GcRDswnl1ktZLvHmUsg1GOsvpwT4Jmq7s 3EfAztH-hrw5h3Y5Xvo

They're called "Clean Strip Disks" ....and will be what you're looking for at your local hardware supply store. (home depot / ace / lowes / etc....)

They even sell them at Harbor Freight (http://www.harborfreight.com/replacement-wheel-for-electric-paint-remover-66101.html) for like $7.00

Good luck.... be sure to post up yur solution, and some "after" pics too!

[HeepJr]

Thanks picking one up tomorow and i will got alot of welding to do

[Brasscatz]

....if you cant get it up, I would recommend a little blue pill.... I hear they work wonders. :D

Josh knows from experience... and if the blue pill doesn't work, he has a banana hammock and Bane mask that'll do the trick. Just let him know what breaks first....

[HeepJr]

Damn you two go out to the woods together to role play or do you just know his sexual fantasies haha

[Brasscatz]

HAHAHAHA!!!! His subconscious let it all out of the bag... listen from 124:00


Ep. 124 - XJ TALK SHOW! - YouTube

[HeepJr]

In all seriousness, Yea I would use an angle grinder, and I would stay away from the typical grinding disks, or flap wheels.
You'll want to go with something that is designed more for stripping paint...
THESE work real well on the undercoating when prepping to weld on frame stiffeners.
http://t2.gstatic.com/images?q=tbn:ANd9GcRDswnl1ktZLvHmUsg1GOsvpwT4Jmq7s 3EfAztH-hrw5h3Y5Xvo

They're called "Clean Strip Disks" ....and will be what you're looking for at your local hardware supply store. (home depot / ace / lowes / etc....)

They even sell them at Harbor Freight (http://www.harborfreight.com/replacement-wheel-for-electric-paint-remover-66101.html) for like $7.00

Good luck.... be sure to post up yur solution, and some "after" pics too!

They worked beautifully Thanks :D
sadly it took it down to fresh metal so i had to spray it over with a edging primer to keep the rust from spreading ill post a picture later now just got to cut out the rust and weld in new sheet metal :D

[HeepJr]

Worked great here is a picture i am cutting around the wheel wells and near the bumper cutting and bending new metal tonight

[rabies]

i used blow torch :/