U joints. all same?

[rabies]

i need to replace ALL of my U-joints.:bang:
are the ones for the front and rear driveshaft and front cv shafts the same?

if so how many do i need?
7?

im buying loades of front end and suspension parts. and one day il attack the jeep with pb blaster and a torch and replace everything at once

found this. kinda answers question
http://www.xjtalk.com/showthread.php?t=11208&highlight=joints

[4.3LXJ]

All of the drive shaft U joints are Spicer 1310s You will need six, as well as a ball and socket for the front CV joint

[rabies]

ball and socket?
i bought ball joints as well for the front.

[4.3LXJ]

When you get the CV joint on the front driveline apart, you will see it. It is what makes a CV joint a CV joint. It is also what wears out the most

[rabies]

oh those look just like ujoints.
i know the grand cherokee has the rubber boot cv axle type.

when i look on ebay for 1310 u joints they say "incompatible" for 98 cherokee??


these
http://www.ebay.com/itm/JEEP-TJ-FRONT-REAR-4X4-U-JOINT-DRIVESHAFT-SPICER-1310-U-JOINT-REPLACEMENT-KIT-/370991200090?pt=Motors_Car_Truck_Parts_Accessories&hash=item5660cc775a&vxp=mtr#ht_0wt_0

[4.3LXJ]

As far as I know, all XJs have the same size U joint on drivelines. The axles are another matter, they are a different size. Also, the front driveline has a double cardan joint, usually referred to as a CV joint. That joint has two 1310 crosses and a ball and socket in-between. I believe the axle joints are a 297.

[rabies]

i think i get it. the joints on the axles(at the hub) are different than driveshaft u joints.

[4.3LXJ]

Yup