casaintsfan
03-31-2014, 09:50 PM
getting ready to install a volvo 2 speed fan with volvo controller, i've searched and searched and the one question i have is using the 2 speed fan switch ECHFS151 in place of the stock fan swicth in the radiator bung. same thread pattern M22-1.5 so it should fit right?
i also have the HO thermostat housing that i could put a fan switch to turn on the the other fan which is of a 99.
a little backround on my rig,
89 laredo
4.0
aw4
closed system
99 fan has been wired to a switch by previous owner using a relay (not the stock relay)
my goal is to get everything to turn on without a switch because last summer i forgot to turn the switch on a few times and it gets pretty hot here (Bakersfield, Ca.) in the summer with plenty of days over 100*
using a swicth just to turn the fans off for water crossings.
anyone use a set up like this, any input would be awesome
thanks
Larry
i also have the HO thermostat housing that i could put a fan switch to turn on the the other fan which is of a 99.
a little backround on my rig,
89 laredo
4.0
aw4
closed system
99 fan has been wired to a switch by previous owner using a relay (not the stock relay)
my goal is to get everything to turn on without a switch because last summer i forgot to turn the switch on a few times and it gets pretty hot here (Bakersfield, Ca.) in the summer with plenty of days over 100*
using a swicth just to turn the fans off for water crossings.
anyone use a set up like this, any input would be awesome
thanks
Larry