View Full Version : TPS trans code
ches30
12-17-2013, 12:03 PM
Transmission shifts funny have a TPS code for the transmission. When I checked the live data for the TPS I get a reading under the engine module but no reading under the transmission module. For whatever reason the transmission is not recognizing TPS. Any ideas?
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
ches30
12-17-2013, 12:04 PM
Sorry forgot to say 98 XJ four-wheel-drive 4.0 automatic
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
Brasscatz
12-17-2013, 12:48 PM
I think I would start by checking all the connectors for tight connections and wear and tear + clean them up, then if that fails I'd replace the tps
Sent from my Samsung Galaxy S4 because my microwave couldn't do it
4.3LXJ
12-17-2013, 02:29 PM
A bad TPS will affect the shift points of the tranny. Better check that out. More than likely it needs to be replaced
ches30
12-17-2013, 07:21 PM
I'm getting full range reading from the scanner, so TPS is good. Engine runs great, just no TPS reference for the transmission module.
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.