View Full Version : Swaybar end links diameter?
XJMikey
10-04-2013, 11:45 AM
Anyone know the diameter of factory swaybar end links? I want to make my own disconnects by cutting off the link ends and replacing the center with a piece of steel pipe and pins.
Thanks for any help.
XJ Wheeler
10-04-2013, 12:03 PM
If i can find them and nobody has answered when i get home I'll measure my brothers old ones. Mine are long gone.
Sent via messenger pigeon - i talk, he types.
4.3LXJ
10-04-2013, 12:25 PM
Those are not very thick. Might I suggest covering them with some tubing and then pinning that area?
XJMikey
10-04-2013, 02:05 PM
If i can find them and nobody has answered when i get home I'll measure my brothers old ones. Mine are long gone.
Sent via messenger pigeon - i talk, he types.
Thanks
Those are not very thick. Might I suggest covering them with some tubing and then pinning that area?
Either way would work. I just don't want to spend $150 for links.
XJ Wheeler
10-05-2013, 01:19 AM
I didn't forget, okay, a little but i got home late and made sure i made a note so i wouldn't forget... for too long.
1/2" diameter. And in case it makes a difference those came from a '90 base XJ.
Sent via messenger pigeon - i talk, he types.
XJMikey
10-05-2013, 07:57 AM
I didn't forget, okay, a little but i got home late and made sure i made a note so i wouldn't forget... for too long.
1/2" diameter. And in case it makes a difference those came from a '90 base XJ.
Sent via messenger pigeon - i talk, he types.
No worries. Thanks. I'm only going to make a short link.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.