$225 Shipped To Your Door Stubby Winch Tray XJ / MJ Bumper!!!

[VIRGINIA FABRICATION]

Hello, new to the forum and looking forward to being a member here :xj-blue:

WE OFFER A WINCH BUMPER TO YOUR XJ / MJ FOR ONLY $225, SHIPPED TO YOUR DOOR :D

I HAVE SOLD QUITE A FEW OF THESE, LOTS OF HAPPY CUSTOMERS :)

- 3/16" STEEL CONSTRUCTION, BUMPER SHIP WEIGHT (PACKAGED TO SHIP) IS 55 LBS.

BOLTS ON TO THE JEEP "FRAME" USING 10 BOLTS FOR ADD' STRENGTH, NOT JUST THE FIRST THREE LIKE MOST USE.

WILL ACCEPT UP TO A 12K WINCH ( WINCH / FAIRLEAD / JEEP PICTURED BUT NOT INCLUDED)

WINCH BOLT PATTERN IS 10'' X 4.5''

(PLEASE NOTE IF YOUR WINCH'S CONTROL BOX MOUNTS ON THE TOP LIKE THE ONE PICTURED AND THE WIRES EXIT OUT THE BACK SOME VERY MINOR TRIMMING TO THE GRILL MAY BE NECESSARY)

COMES WITH TWO 3/4'' D RINGS ON THE FRONT FOR TOWING / RECOVERY. WHERE THEY MOUNT TO THE BUMPER HAS BEEN BOXED AND BRACED FOR ADD' STRENGTH.

COMES PAINTED WITH BLACK RATTLE CAN TRUCK BED LINER FOR A DURABLE FINISH.

ALL HARDWARE TO BOLT BUMPER TO THE JEEP IS INCLUDED!!!

THE LEAD TIME ON SHIPPING IS UP TO 5 BUSINESS DAYS.

I SHIP VIA UPS GROUND, YOU WILL NEED TO SIGN FOR IT!!!

FREE SHIPPING LOWER 48 ONLY (will ship to AK, HI but you the pay shipping)

YOU CAN CONTACT ME THROUGH THE FORUM TO ORDER, OR ORDER THROUGH EBAY http://www.ebay.com/itm/281107981202?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649, OR ORDER VIA MY WEBSITE WWW.VIRGINIAFABRICATION.COM

http://i1184.photobucket.com/albums/z329/MONSTERMUDDER1/Website/JEEP1version2_zps117e1c9c.jpg (http://s1184.photobucket.com/user/MONSTERMUDDER1/media/Website/JEEP1version2_zps117e1c9c.jpg.html)

http://i1184.photobucket.com/albums/z329/MONSTERMUDDER1/DSC_0361_zpscca3261b.jpg (http://s1184.photobucket.com/user/MONSTERMUDDER1/media/DSC_0361_zpscca3261b.jpg.html)

http://i1360.photobucket.com/albums/r650/virginiafabrication/DSC_0001_zps5c51ea76.jpg (http://s1360.photobucket.com/user/virginiafabrication/media/DSC_0001_zps5c51ea76.jpg.html)

http://i1360.photobucket.com/albums/r650/virginiafabrication/DSC_0003_zps63120a49.jpg (http://s1360.photobucket.com/user/virginiafabrication/media/DSC_0003_zps63120a49.jpg.html)

http://i1360.photobucket.com/albums/r650/virginiafabrication/DSC_0005_zps1d6ca27d.jpg (http://s1360.photobucket.com/user/virginiafabrication/media/DSC_0005_zps1d6ca27d.jpg.html)

http://i1184.photobucket.com/albums/z329/MONSTERMUDDER1/Website/mine_068_zpsf33e1513.jpg (http://s1184.photobucket.com/user/MONSTERMUDDER1/media/Website/mine_068_zpsf33e1513.jpg.html)

[Andrew XJ]

I must say much more affordable than any other bumpers I've seen, I'll probably have the non winch bumper ordered by the end of the week.

[VIRGINIA FABRICATION]

Thanks for your order Andrew XJ, i'm glad you like it.

[prerunner1982]

Looks like that would also make a good starting platform for someone to make a larger bumper off of.

Have you thought about offering longer unibody "frame" tie in brackets?

[VIRGINIA FABRICATION]

I actually use the stubby's as a base and build full width bumpers using them, such as this one I recently did -

http://i1360.photobucket.com/albums/r650/virginiafabrication/2013-09-14124849_zpsc13aec88.jpg (http://s1360.photobucket.com/user/virginiafabrication/media/2013-09-14124849_zpsc13aec88.jpg.html)

As for the frame tie in brackets, It's not a worthwhile investment for me to pursue at this time. They can easily be sourced from other vendors if someone wanted to add them. For most the 10 bolt tie in mounts that comes with the bumper is more than enough for a daily driver / mild trail rig.

[Andrew XJ]

Thanks for your order Andrew XJ, i'm glad you like it.

yeah it already got me out of trouble once. went riding down a trail heard a tree fall on my way back out notice that it fell right behind me so I had to push it out of the way .

[VIRGINIA FABRICATION]

Thanks for the orders :)

[Andrew XJ]

how many pounds is the winch bumper rated ?

[VIRGINIA FABRICATION]

It will hold up to a 12,000 Lbs. Winch

[Andrew XJ]

I'll probably go ahead and get one here in the next month, do you have any rear bumpers with D rings on them?

[xj4life2]

So as a side note , do you make something similar for a 95 Full size Bronco, I know its not an XJ but it thinks it is.

PS your rear tire carrier is super nice !!! you people should go to his site and check it out !!!!

[VIRGINIA FABRICATION]

I'll probably go ahead and get one here in the next month, do you have any rear bumpers with D rings on them?

I can custom make you a rear bumper with D rings, I could also ship it with the front to save on shipping.

[VIRGINIA FABRICATION]

So as a side note , do you make something similar for a 95 Full size Bronco, I know its not an XJ but it thinks it is.

PS your rear tire carrier is super nice !!! you people should go to his site and check it out !!!!

I'm planning on expanding my bumpers beyond just heaps here in the next few months so please keep checking back :)

[VIRGINIA FABRICATION]

Still just $225 shipped to your door :)

Edit

I no longer sell on eBay due to their outrageous sellers fees, please visit my site www.virginiafabrication.com or feel free to PM me.

[sinat]

I actually use the stubby's as a base and build full width bumpers using them, such as this one I recently did -

http://i1360.photobucket.com/albums/r650/virginiafabrication/2013-09-14124849_zpsc13aec88.jpg (http://s1360.photobucket.com/user/virginiafabrication/media/2013-09-14124849_zpsc13aec88.jpg.html)

As for the frame tie in brackets, It's not a worthwhile investment for me to pursue at this time. They can easily be sourced from other vendors if someone wanted to add them. For most the 10 bolt tie in mounts that comes with the bumper is more than enough for a daily driver / mild trail rig.

what would something like this cost?

[Andrew XJ]

once again my $95 bumper has saved my ass today I was in off road park all day and I went up the third hardest obstacle they had got stuck in rut and had to be dragged on my axles and diff's all the way out and that's super stubby bumper was the only pull point they pulled thirteen thousand pounds off of that bumper and it still in one piece not even dented.

I was so stuck that a Cherokee on 35 inch boggers swampers with being dragged into the same ruts I was he had to snatch a couple of times but it only took 30 minutes to get out and I had fun the rest of the day so just saying the bumper is well worth the cost people and I can only assume that this wench bumper on this particular thread it twice as strong

[VIRGINIA FABRICATION]

what would something like this cost?

Thanks for inquiring, a bumper like that runs $350 + Shipping.

[VIRGINIA FABRICATION]

once again my $95 bumper has saved my ass today I was in off road park all day and I went up the third hardest obstacle they had got stuck in rut and had to be dragged on my axles and diff's all the way out and that's super stubby bumper was the only pull point they pulled thirteen thousand pounds off of that bumper and it still in one piece not even dented.

I was so stuck that a Cherokee on 35 inch boggers swampers with being dragged into the same ruts I was he had to snatch a couple of times but it only took 30 minutes to get out and I had fun the rest of the day so just saying the bumper is well worth the cost people and I can only assume that this wench bumper on this particular thread it twice as strong

Impressive :bacondance:

[VIRGINIA FABRICATION]

Website is back up and running http://virginiafabrication.com/?page_id=165

[VIRGINIA FABRICATION]

This bumper is a great way to mount a winch to your XJ :D

[VIRGINIA FABRICATION]

:bacondance:

[VIRGINIA FABRICATION]

Want to turn your Stubby Bumper into a full width bumper?

Add some bolt on "wings" to extend it to the sides of your XJ.

$100 Painted / Shipped.

http://i1360.photobucket.com/albums/r650/virginiafabrication/2014-01-26153937_zpsae4f24ba.jpg (http://s1360.photobucket.com/user/virginiafabrication/media/2014-01-26153937_zpsae4f24ba.jpg.html)

http://i1184.photobucket.com/albums/z329/MONSTERMUDDER1/Website/newheap4_zps554ff267.jpg (http://s1184.photobucket.com/user/MONSTERMUDDER1/media/Website/newheap4_zps554ff267.jpg.html)

[VIRGINIA FABRICATION]

Thanks for the purchases :)

[VIRGINIA FABRICATION]

Thanks for the orders :)

[VIRGINIA FABRICATION]

Thanks for the orders :)

[abebehrmann]

I can't wait for mine!

[VIRGINIA FABRICATION]

I can't wait for mine!

Thanks for the order Abebehrmann, it will ship out early next week :)

[VIRGINIA FABRICATION]

Thanks for the orders :)

[VIRGINIA FABRICATION]

Thanks for the orders :)

[Brasscatz]

I ORDER you to ship me a free bumper :P Just kidding bud ;)

[abebehrmann]

I ORDER you to ship me a free bumper :P Just kidding bud ;)

He'll ship you a free bumper! You just have to pay the $225 shipping charge :smiley-taunt002:

[VIRGINIA FABRICATION]

I ORDER you to ship me a free bumper :P Just kidding bud ;)

:smiley-laughing021:


He'll ship you a free bumper! You just have to pay the $225 shipping charge :smiley-taunt002:

Your Custom one is going out today Abebehrmann :)

[VIRGINIA FABRICATION]

Thanks for the orders :)