Lift question

[ryan32777]

bout to do a 6.5" lift, they recommend using a slip yoke eliminator which got one ordered, its a cut and tap kind, how easy is this to do? and do i need anything else for this lift besides that. any help would be great thanks

[Brasscatz]

They can be fairly easy, but you have to be very precise with your cutting and drilling, so not much room for error on them. You can do it with the tcase still in the Jeep, but for the best results and lower chances of getting something crooked, I suggest pulling it out. As for needing anything else, it just depends on what your lift kit comes with. You'll need longer brake lines, new lower control arms, longer shocks, etc. What all comes with your kit?

Sent from my Samsung Galaxy S4 because my microwave couldn't do it

[4.3LXJ]

You will have better success with the tcase out.

[ryan32777]

the kit comes with all that so im good there, and thanks i will take my tc out when i do it, but the kit also said something bout may also need a longer driveshaft, do i have to have a longer one or is that what the slip yoke eliminator is suppose to take care of

[reddragon72]

most SYE kits allow a front drive shaft for a drop in fit. But I would go with what the kit says.

[denverd1]

you'll definitely need a longer shaft. You can get front shaft from JY or have yours extended. for the money, I'd got with JY model and rebuild it.

[ryan32777]

ok thanks for yalls help appreiciate it