View Full Version : Transfer case lever rattle
CdnJeeper
05-09-2013, 05:02 PM
Hey all, when my jeep is in drive and sitting at a light my transfer case lever rattles. I am curious if this is a common issue and how I should fix it. Do I need to remove the console or go under the jeep? I am not very familiar with the way the lever works.
Any help is great. Thanks.
prcjeep
05-09-2013, 06:05 PM
Hey all, when my jeep is in drive and sitting at a light my transfer case lever rattles. I am curious if this is a common issue and how I should fix it. Do I need to remove the console or go under the jeep? I am not very familiar with the way the lever works.
Any help is great. Thanks.
This happens every now and then... I would check all the littel gromets on the linkage underneath and maybe pull the shifter position indicator bezel our and see if there is anything missing or if a bolt on the pivot is loose.
4.3LXJ
05-09-2013, 06:37 PM
You might also check the motor and transmission mounts. As they wear, they can transmit more vibration to the body and in this case, the linkage
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.