azzole11
02-23-2013, 09:46 PM
Woke up this morning and decided that today was the day to install the T.H.O.R. corner panels.
First thing to do is remove the interior panels
http://i757.photobucket.com/albums/xx212/azzole08/Jeep%20Stuff/20130223_165318.jpg
Dont forget to remove, unless you already have, your flares. They need to come off for this. Fine by me, needed an excuse to put TJ flares on the rear.
Next with the tail light housings removed, rout the wiring harness to the inside and install the rear panel cover plates.
http://i757.photobucket.com/albums/xx212/azzole08/Jeep%20Stuff/20130223_110136.jpg
After putting the two bolts in the new tail light housing, drill the holes in the quarter panel, using the armor as a template
http://i757.photobucket.com/albums/xx212/azzole08/Jeep%20Stuff/20130223_112304.jpg
and attach with the supplied stainless hardware.
http://i757.photobucket.com/albums/xx212/azzole08/Jeep%20Stuff/20130223_112732.jpg
http://i757.photobucket.com/albums/xx212/azzole08/Jeep%20Stuff/20130223_113850.jpg
Wire in your new lights and enjoy :coffee:
http://i757.photobucket.com/albums/xx212/azzole08/Jeep%20Stuff/20130223_170051.jpg
http://i757.photobucket.com/albums/xx212/azzole08/Jeep%20Stuff/20130223_170042.jpg
I do recommend a helper, unless your arms are very long and very flexible you cant do it alone.
First thing to do is remove the interior panels
http://i757.photobucket.com/albums/xx212/azzole08/Jeep%20Stuff/20130223_165318.jpg
Dont forget to remove, unless you already have, your flares. They need to come off for this. Fine by me, needed an excuse to put TJ flares on the rear.
Next with the tail light housings removed, rout the wiring harness to the inside and install the rear panel cover plates.
http://i757.photobucket.com/albums/xx212/azzole08/Jeep%20Stuff/20130223_110136.jpg
After putting the two bolts in the new tail light housing, drill the holes in the quarter panel, using the armor as a template
http://i757.photobucket.com/albums/xx212/azzole08/Jeep%20Stuff/20130223_112304.jpg
and attach with the supplied stainless hardware.
http://i757.photobucket.com/albums/xx212/azzole08/Jeep%20Stuff/20130223_112732.jpg
http://i757.photobucket.com/albums/xx212/azzole08/Jeep%20Stuff/20130223_113850.jpg
Wire in your new lights and enjoy :coffee:
http://i757.photobucket.com/albums/xx212/azzole08/Jeep%20Stuff/20130223_170051.jpg
http://i757.photobucket.com/albums/xx212/azzole08/Jeep%20Stuff/20130223_170042.jpg
I do recommend a helper, unless your arms are very long and very flexible you cant do it alone.