jdel
10-15-2012, 11:13 AM
Hey all, just picked up a 95 Sport for very very cheap and I'm trying to fix some issues.
1) The P.O. installed a Valet keyless entry system. At some point before/after installing the system, the instrument cluster fuse started to blow on a regular basis. I have already tried unplugging the Valet unit to see if the fuse would blow, and it lasted a little longer but still blew. I figure I just have to take apart the dash and go through the wiring, unless I'm mistaken. Am I going about it the right way? Is there any easier way to figure out why it's blowing?
2) Obviously being a new owner, I want to test out the 4wd. After multiple attempts to try and get it into 4wd, I am completely stumped. I read through the owners manual and multiple forum posts to see what the recommended procedure to get it into 4wd and still haven't had any success. After moving the selector into neutral, I am able to move the 4wd selector to 4L. If I pop the transmission into drive, everything seems alright, but if I turn the wheel even a little bit, I get a surging or "bucking" from the driveline. What is this an indication of?
3) The P.O. installed an aftermarket intake. What benefit does this provide outside of increased airflow? I don't know how I feel about the potential of sucking up water through it since it seems to be longer and pointed down towards the ground rather than being level. It seems to me that maybe this intake is a bit overkill and that I would be better off going to something like the 2000 intake that everyone talks about.
Sorry for the questions (and if they've already been answered somewhere else. I searched quite a bit before even considering posting) and I'm sure I'll have more. I'll post some pics of it's minty stock condition later on.
1) The P.O. installed a Valet keyless entry system. At some point before/after installing the system, the instrument cluster fuse started to blow on a regular basis. I have already tried unplugging the Valet unit to see if the fuse would blow, and it lasted a little longer but still blew. I figure I just have to take apart the dash and go through the wiring, unless I'm mistaken. Am I going about it the right way? Is there any easier way to figure out why it's blowing?
2) Obviously being a new owner, I want to test out the 4wd. After multiple attempts to try and get it into 4wd, I am completely stumped. I read through the owners manual and multiple forum posts to see what the recommended procedure to get it into 4wd and still haven't had any success. After moving the selector into neutral, I am able to move the 4wd selector to 4L. If I pop the transmission into drive, everything seems alright, but if I turn the wheel even a little bit, I get a surging or "bucking" from the driveline. What is this an indication of?
3) The P.O. installed an aftermarket intake. What benefit does this provide outside of increased airflow? I don't know how I feel about the potential of sucking up water through it since it seems to be longer and pointed down towards the ground rather than being level. It seems to me that maybe this intake is a bit overkill and that I would be better off going to something like the 2000 intake that everyone talks about.
Sorry for the questions (and if they've already been answered somewhere else. I searched quite a bit before even considering posting) and I'm sure I'll have more. I'll post some pics of it's minty stock condition later on.