Tire size

[95xj]

What's the biggest size tires i can fit on a 3inch lift with cut fenders??

[bigbuk29]

Ive seen guys with 35's with only 3"s and alot of cutting just depends on how much cutting and bumpstopping you wanna do

[cantab27]

how far ya want to cut...had 3inch 33s on my pig..

http://i469.photobucket.com/albums/rr52/cantab27/jeepin%20and%20bits/oil007.jpg

what ya going to be wheeling in / on

[95xj]

I pretty much do mud and a little vally stuff , how much did you have to cut for 33's? do they rub ??

[cantab27]

no rub ,,, do need the right off set rims ,or will rub on the front arms...hang on dude will dig up thread with cutting in there....

[cantab27]

will need to do bump stops ..links in there for that,,,,mine was a 95 as well..

bit of dribble in thread but lots of pics...

http://www.xjtalk.com/showthread.php?t=3037

[4.3LXJ]

To be practical, 33s. Yes larger tires have been done. I have a buddy with 4.5" of lift and 54s, but really there is less and less XJ there all the time

[XJ Wheeler]

To be practical, 33s. Yes larger tires have been done. I have a buddy with 4.5" of lift and 54s, but really there is less and less XJ there all the time

I gotta ask for a pic of that.

[4.3LXJ]

No pic, only saw it marked for cutting. However I might get one in a year or so when I get together with him for the Rubicon

[XJ Rat]

What's the biggest size tires i can fit on a 3inch lift with cut fenders??

31" tires and no cutting on 3" of lift. If you use stock Jeep rims (like Grizzlys) then 1.25" spacers will be required to keep the front tires out of the control arms.

See my album - Creekside 11-11. Those are 31" tires, 3.5" RE lift + 3/4" spacers in the front and extended shackles in the rear for 4.25" of lift.

[702XJCruiser]

There was a featured ride in JP Magazine a couple years ago. Yellow XJ running 42's on what amounted to be about 2" of lift