View Full Version : 4.10 motive ring & pinion
willtodo
07-01-2012, 01:22 PM
http://i697.photobucket.com/albums/vv340/willtodo/DSCF1212.jpg
There brand new,,,,theres one master rebuild kit and the two set of ring and pinion,,,look up part number to see if ist for your app, i think its for xj high pinion,,i wont pertend to know what all it fits,,ill take $200 for all or $150 for the kit and one set,,,,Im in Gladewater Tx,,,id meet someone within reason,,or look into shipping, 903-374-1161
willtodo
07-02-2012, 07:39 PM
surely im not askin too much,,, this is two complete sets,,, and a master kit
Mudderoy
07-05-2012, 01:27 PM
Motive Gear D30-410F - Motive Gear Dana Ring and Pinion
Gear, Ring and Pinion, 4.10:1 Ratio, Dana 30, Set
Ring Gear Rotation: Reverse
$155.99 + shipping from Summit Racing :link: (http://www.summitracing.com/parts/MGR-D30-410F/)
If you have two sets, the only way someone would need both is if they had two XJ's, or an XJ and a TJ, etc... Dana 30 is only on the front. My 98 for example is a Dana 30 HP front and a Chrysler 8.25 rear.
bluedragon436
08-02-2012, 07:51 PM
I just saw this for the first time... and after doing some research, it appears that this setup will work with my XJ, and as said above, would only need one set of gears.. I am wondering if this setup is still available for sale?? I would be looking to pick up one set of gears and the rebuild kit shipped to 09012 if you could possibly get me a shipped price for that setup I'd greatly appreciate it.
willtodo
08-04-2012, 03:18 PM
Motive Gear D30-410F - Motive Gear Dana Ring and Pinion
Gear, Ring and Pinion, 4.10:1 Ratio, Dana 30, Set
Ring Gear Rotation: Reverse
$155.99 + shipping from Summit Racing :link: (http://www.summitracing.com/parts/MGR-D30-410F/)
If you have two sets, the only way someone would need both is if they had two XJ's, or an XJ and a TJ, etc... Dana 30 is only on the front. My 98 for example is a Dana 30 HP front and a Chrysler 8.25 rear.
Mr. Mudderoy,,,Im asking $150 for one set AND the setup kit,, those kits are about $100 bucks by my research and as u pointed out the Ring and pinion is $150 at summit,,,, so $20 or so for shipping puts the buyer saving $80. another $20 gives you a spare front ring and pinion,,or one to sell to a bud to recover some of your own cost.
If your going to sharp shoot someones add ,, atleast read the add thoroughly
Mudderoy
08-05-2012, 07:48 AM
Mr. Mudderoy,,,Im asking $150 for one set AND the setup kit,, those kits are about $100 bucks by my research and as u pointed out the Ring and pinion is $150 at summit,,,, so $20 or so for shipping puts the buyer saving $80. another $20 gives you a spare front ring and pinion,,or one to sell to a bud to recover some of your own cost.
If your going to sharp shoot someones add ,, atleast read the add thoroughly
I'll change this reply. I'll tell you what. I'll just leave stuff like this alone in the future. I was hoping to help you by pointing out that the price was near retail so you could actually reconsider the asking price, and sell this. I'll just let the market place handle it in the future. If I misread the post potential buyers may have also.
maxxrua08
10-07-2012, 02:34 PM
Do you still have the combo set for sale?
So, if you get $150 for the kit & one set, what will you take for the other set? I'm interested! Have you sold qnything yet?
So, is this a dead Thread?
Showtime3492
12-10-2012, 08:48 PM
Ill give you 100 plus shipping just for a 4.10 ring and pinion. I have the carrier and install kit.
barflyfisherman
04-29-2013, 01:28 PM
You still sitting on a set of these gears & an install kit?
I'm interested - PM me.
barflyfisherman
04-29-2013, 01:42 PM
That part number is for a LOW PINION (drive shaft is BELOW the plane of the axle).
barflyfisherman
04-29-2013, 01:43 PM
Part number for HIGH PINION is a D30-410R (drive shaft is ABOVE the plane of the axle).
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.