PDA

View Full Version : AW4 front seal replacement.



bigjim350
06-17-2012, 08:45 PM
My jeep is pouring tranny fluid from the front of the transmission. Has anybody here replaced the front seal on a AW4? Cause I see 2 different seals when i look it up. One torque converter seal, and a front pump seal. I guess ill just buy both and see which one I need. As bad as its leaking, the problem should be easy to spot.

4.3LXJ
06-17-2012, 11:04 PM
Jim

You will need both. The pump section holds all the stuff in, planetaries and clutches. It needs its own seal. The torque converter seal looks like a pinion seal.

bigjim350
06-17-2012, 11:08 PM
Can you replace the pump seal without opening up the trans too much..ie just a few bolts?

4.3LXJ
06-17-2012, 11:18 PM
Yes

If you were to rebuild, the pump is the first thing to come off, then the rest of the stuff.

bigjim350
06-17-2012, 11:21 PM
Ight thanks. We will see what happens. Gonna yank it out tomorrow. Just hoping the problem will be very obvious. I am a pretty good mechanic but when it comes to tranny's or carberators im pretty stupid.

LizardRunner
06-21-2012, 07:56 AM
That's just inexperienced Jim. I have to keep at least one book open when I get into stuff like that. I've done a total of two carberators on cars and one auto transmission. I can do it, but what a pro would do in one hour will take me all day.