OrangeXJ
04-27-2012, 08:52 AM
I got a Power Aid throttle body spacer. I had a full size Bronco that I installed one on and my mpg went from 8 to 12 and better throttle responce. So here is a little write up
http://i335.photobucket.com/albums/m470/GregKnowles/Picture192.jpg
First remove the air intake
http://i335.photobucket.com/albums/m470/GregKnowles/Picture193.jpg
Then remove the throttle body and the bracket that holds the throttle cable
http://i335.photobucket.com/albums/m470/GregKnowles/Picture194.jpg
Then install the spacer
http://i335.photobucket.com/albums/m470/GregKnowles/Picture195.jpg
Then inshttp://i335.photobucket.com/albums/m470/GregKnowles/Picture196.jpgtall the throttle cable bracket spacers
Put the air intake back on.
http://i335.photobucket.com/albums/m470/GregKnowles/Picture197.jpg
This took about 30 min. to do.
http://i335.photobucket.com/albums/m470/GregKnowles/Picture192.jpg
First remove the air intake
http://i335.photobucket.com/albums/m470/GregKnowles/Picture193.jpg
Then remove the throttle body and the bracket that holds the throttle cable
http://i335.photobucket.com/albums/m470/GregKnowles/Picture194.jpg
Then install the spacer
http://i335.photobucket.com/albums/m470/GregKnowles/Picture195.jpg
Then inshttp://i335.photobucket.com/albums/m470/GregKnowles/Picture196.jpgtall the throttle cable bracket spacers
Put the air intake back on.
http://i335.photobucket.com/albums/m470/GregKnowles/Picture197.jpg
This took about 30 min. to do.