Results 1 to 3 of 3

Thread: Neutral Safety Switch from Hell

  1. #1
    Join Date
    Mar 2012
    Location
    ft.lauderdale, Florida
    Posts
    2

    Default Neutral Safety Switch from Hell

    I have a 2000 jeep Cherokee auto non 4x4

    I went ahead and bought the neutral safety switch from quadratec because my jeep just wouldn't start and the code I got from my ecu was that it was the nss (I checked all the other possibilities that another post said to check) . I took it off and put it on with no problem, aligned it "to my knowledge" but now the car cranks but just wont start I think I've read over a dozen post on how to put it on and off but still nothing and Im not getting no codes.

    I grew up working on cars but this is my first Jeep so I think i finally hit a wall

    Any help will be greatly appreciated

  2. #2
    Join Date
    Jun 2010
    Location
    Conroe
    Posts
    2,527

    Default Re: Neutral Safety Switch from Hell

    Check for spark if no spark have a look at the Crank trigger. You could have booger-ed up the connection to that sensor "same side as the wiring but on top of the transmission" the plug for the trigger is on the back of the intake.
    Trailer Queen Jeep Member (Hoping Bigjim350 will show me how to wheel since 2011)
    Now charging a shop fee!

  3. #3
    Join Date
    Mar 2012
    Location
    ft.lauderdale, Florida
    Posts
    2

    Default Re: Neutral Safety Switch from Hell

    thanks you just gave me some hope before I gave up even tho I really didn't want to quit on my jeep because it would look a little funny going camping to the holey lands in a mustang PRAYING TO THE JEEP GODS

Similar Threads

  1. Cleaning Your Neutral Safety Switch
    By Melissa in forum Technical "HOW TO" Articles
    Replies: 40
    Last Post: 06-03-2014, 09:46 AM
  2. NSS switch (Neutral Safety Switch)
    By cantab27 in forum OEM/Factory
    Replies: 10
    Last Post: 12-21-2010, 03:26 PM
  3. neutral safety switch
    By XJRunner in forum OEM/Factory
    Replies: 14
    Last Post: 10-25-2010, 07:57 PM
  4. Adjusting Neutral Safety Switch
    By Cobrajay in forum Technical "HOW TO" Articles
    Replies: 5
    Last Post: 03-29-2010, 07:29 PM
  5. Neutral Safety Switch
    By Melissa in forum OEM/Factory
    Replies: 3
    Last Post: 05-17-2009, 11:11 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •