Results 1 to 2 of 2

Thread: Rusty LCA Alignment Adjuster FIX!!!

  1. #1
    Join Date
    Aug 2014
    Location
    Kittanning,Pa
    Posts
    14

    Default Rusty LCA Alignment Adjuster FIX!!!

    So as we all know and have experienced. You end up with this


    So you think.. well pb blaster and or some heat and i can get those off.....

    HaHa ya right u get pissed off and cut them off with the cut off wheel or maybe got lucky and they snapped off.. but none the less u are now stuck coz well this part is a Dealer part or Junkyard part.. which.. well do u really wanna go through what u just did again and take a chance on trying to remove a usable part?

    I fixed mine and ill show ya how..

    So i just cut the studs off mine.. next i just layed the metal adjuster on a block of wood and started beating on the studs on the inside of the part.. they are Tack welded in.. on a side note i did ruin a straight end screwdriver.. but whats 2 at this point lol.. so 10mins in i get this



    went down to the hardware store bought some grade 8 bolts the same size as the studs that was there... NOTE!! get ones that the head is not bigger then the pieces u beat off with a hammer..

    Laid down some Tack welds and boom.. good as new and it cost me less then 5 including the broken screw driver..




    Comments welcome or need any help with this.. PM me or leave em' here..


    -Joe

  2. #2
    Join Date
    Nov 2014
    Location
    Duluth, MN
    Posts
    11

    Default Re: Rusty LCA Alignment Adjuster FIX!!!

    Just the info i have been looking for! Thanks for posting.


    Sent from my iPhone using Tapatalk

Similar Threads

  1. Alignment
    By chuck2000xj in forum OEM/Factory
    Replies: 16
    Last Post: 11-18-2015, 10:47 AM
  2. Rusty LCA Alignment Adjuster FIX!!!
    By Zeks05 in forum Technical "HOW TO" Articles
    Replies: 1
    Last Post: 01-27-2015, 06:59 PM
  3. 2 in lift wobble and alignment
    By dycksonjl in forum General Talk
    Replies: 8
    Last Post: 06-03-2014, 03:17 PM
  4. Long arm alignment
    By altonamud in forum Modified
    Replies: 18
    Last Post: 01-08-2014, 08:17 PM
  5. **Front alignment help**
    By rm2406 in forum OEM/Factory
    Replies: 11
    Last Post: 01-03-2013, 10:57 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •